Sanyo NV-E7000 Installation And Operation Manual page 23

COMPONENT NAMES AND FUNCTIONS (3)
DVD VIDEO/CD OPERATION
MAIN UNIT
L
button
Pressing this button while a
DVD disc is being played back
will change the screen into the
title menu. (See p.145)
Ö
button
– : reduce volume,
+ : increase volume
Ü
button
Every time this button is pressed, the screen
switches from the NAVI to the DVD to the VIDEO
mode. (See p.141)
Å
button
¡This button returns the display to the
previous selection screen when
effectuating initial settings.
¡Pressing while in image adjustment
mode will cancel that mode.
(See p.180)
w
STOP button ( )
Pressing while playing back will stop playback.
(See p.143)
41
É
button
¡Pressing while the DVD disc is being played
back will move the display to the menu screen.
(See p.146)
¡Pressing for over 1.5 seconds will switch to
image adjustment mode. (See p.178)
PLAY/PAUSE button
q
( )
¡Press to start playback.
(See p.143)
¡Pressing while playing
back will pause the video
and sound. Press again to
resume playback.
(See p.143)
r e
SKIP button ( / )
Used for chapter/track/image
back/image forward while the disc is
played back. (See p.144)
Ä
button
¡This button executes the item selected on
the screen. (See p.40)
Joystick (a)
¡Used to select items on the screen. (See p.40)
¡When in image adjustment mode, use the
vertical Joystick (d) to select items to adjust
and the lateral joystick (s) to perform the
adjustment. (See p.178 to 180)
Liquid crystal display
Brightness sensor
Speaker
Video I/O terminal
Used when connecting to a TV
image input terminal using the
included RCA cord (when in
VIDEO mode). (See p.195)
Audio I/O and optical digital
audio output terminal
Used when connecting the sound
input terminal of a TV or amp
using the included RCA cord
(when in AUDIO mode).
(See p.195)
Headphone terminal
Used when connecting commercially
available headphones. (See p.195)
Power supply switch
I
N
T
R
O
D
U
C
T
I
O
N
Remote control
infrared receiver
Extension terminal
Brake terminal
Connects to the vehicle's parking
brake signal line. (See p.36)
DC input 9V terminal
Connects to the included 12V
vehicle battery cigarette lighter
cable / the included AC/DC
adaptor. (See p.50 and 51)
42