Tint Mode-Making Half-Tone Prints - Ricoh Priport JP1030 Operating Instructions Manual

Tint Mode—Making Half-tone Prints
Use the {Tint} key to make half-tone
prints.
A
Press the { { { { Tint} } } } key to select Tint
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the { { { { Start} } } } key.
D
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
justing The Print Image Position")
or the side table fine adjusting
dial (see
Print Image Position To The Right
Or Left").
E
GRTINT0E
Enter the number of prints with
the { { { { Number} } } } keys.
F
Press the { { { { Print} } } } key.
TSLS018N
TSLS012N
Tint Mode—Making Half-tone Prints
P.8 "Ad-
P.8 "Shifting The
1
TSLS014N
11