Table of Contents
Advertisement
WHAT TO DO IF SOMETHING GOES WRONG
• Originals lighter than 40 g/m
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148 mm
• Originals larger than 257 mm
• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
5
Note
If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the {Paste Shadow Erase} key. If the thickness of the paste-
up original is more than 0.1 mm, and the space between the pasted parts is
less than 2 mm, 0.08", a shadow might appear on the prints.
The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5 mm, 0.2".
Original
a: 5 mm, 0.2"
Do not mix different sizes of originals in the optional document feeder.
Clean the separation roller if it is dirty. (A dirty separation roller might slip
and cause original misfeeds.)
Remove staples or clips of originals. Fan originals that have had staples or
clips removed.
84
2
, 10.6 lb (when setting one original at a time)
105 mm, 5.8"
364 mm, 10.2"
Print
a
4.1"
14.4"
Advertisement
Chapters
Table of Contents
