Table of Contents
Advertisement
SP No. Mode
84
AUTO MULTI COPY
87
MEMORY PRINT
88
AUTO MEMORY/
CLASS
113
RESETTABLE COUNT
Changing The Settings Of Service Programs
Function
If you set an original on the exposure glass and
press the {Combine Copies} key and {Start} key,
two identical images are printed on the one sheet.
Note
Default: 0
Adjustment value: 0: No 1: Yes
For details about Combine Copies, see
"Combine Copies—Combining 2 Originals Into
One Print".
If you wish to make print sets of a single page doc-
ument placed on the exposure glass in Memory
Mode, change this setting to Stack. Each print set
or stack will contain the number of prints you pro-
gram in Memory mode.
If set to Memory, Memory mode will work.
Note
Default: 0
Adjustment value: 0: Memory 1: Stack
For details about Memory mode, see
"Memory Mode—Group Printing From Different
Originals".
In this function, the machine stops printing for 2
seconds after one set of prints are completed in
Memory mode and Class mode. This gives you
the chance to separate each set when you do not
have an optional tape dispenser.
For example, you can remove prints one by one
from the paper delivery table or insert one sheet of
paper between the prints.
Note
Default: 0
Adjustment value: 0: No 1: Yes
Used to display the total number of masters and
prints.
• M: Total number of masters
• P: Total number of prints
P.32
3
P.29
59
Advertisement
Chapters
Table of Contents
