Table of Contents
Advertisement
Operation
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
1
tered, press the { { { { Clear/Stop} } } }
key and enter the new num-
ber.
C Press the { { { { Start} } } } key.
Printing starts automatically af-
ter trial print is delivered.
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{ { { { Clear/Stop} } } } key. See p.24
" Sto ppi ng a M ul t i-p rin t
Run".
❒ To return the machine to the
initial condition after print-
i n g , p r e s s t h e { { { { C l e a r
Modes/Energy Saver} } } } key.
14
When Auto Cycle is off
A Make sure that Auto Cycle
mode is not selected.
B Press the { { { { Start} } } } key.
A trial print is delivered to the
paper delivery tray.
C Press the { { { { Proof} } } } key and check
the image density and the im-
age position of the proof print.
Advertisement
Chapters
Table of Contents
