Table of Contents
Advertisement
SilverV-EN.book Page 65 Monday, May 15, 2000 3:23 PM
SP No.
Mode
160
Side Ers.
161
Center Ers.
162
Horizontal Ers.
170-172
Ers. **1L
Ers. **2L
Ers. **3L
Entering decimal values in SP No. 160–162:
• Press the {Program} key to enter a decimal point.
• Press the {q} key to fix the value.
Changing the Settings of Service Programs
Function
Adjust the default side edge margin width in Edge
Erase and Center/Edge Erase mode.
Note
Default:
• Metric Version: 5mm
• Inch Version: 0.2"
Adjustable value:
• Metric Version: 2 – 20mm
• Inch Version: 0.1" – 0.8"
Adjust the default center margin width in Center/
Edge Erase mode.
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
Adjustable value:
• Metric version: 4 – 60mm
• Inch version: 0.2" – 2.3"
Adjust the default horizontal edge (top and bottom)
margin in Edge Erase and Center/Edge Erase mode.
Note
Default:
• Metric version: 5mm
• Inch version: 0.2"
Adjustable value:
• Metric version: 2 – 20mm
• Inch version: 0.1" – 0.8"
Set up and register three original sizes for when per-
forming edge erase of non-standard size originals, or
performing center frame erase.
Note
Default: 0
0mm
Adjustable value: 100-257mm
100-364mm
65
3
Advertisement
Chapters
Table of Contents
