Table of Contents
Advertisement
SilverV-EN.book Page 84 Monday, May 15, 2000 3:23 PM
What to do If Something Goes Wrong
x Clearing Misfeeds
Important
When clearing misfeeds, do not turn off the main switch. If you do, your print
settings are cleared.
- After clearing misfeeds
-
-
-
Press the {Clear Modes/Energy Saver} key to reset the error indicators.
5
x " + "ORIGINAL JAM. REMOVE ORIGINAL"
x
x
"x
Note
These indicators will light when your machine is equipped with the optional
document feeder.
A
Press the ADF unit open lever and open the ADF unit.
84
TSLP016E
Advertisement
Chapters
Table of Contents
