Memory Mode With The Document Feeder - Ricoh Priport JP1030 Operating Instructions Manual

D
Press the { { { { Start} } } } key.
E
Check the image position of the trial or proof print.
Note
If the image position is not correct, adjust it using the {Image Position} keys
(see P.8 "Shifting The Print Image Position Forward Or Backward") or the
side table fine adjusting dial (see
The Right Or Left").
After the first original is on the master, the second original is fed.
If you set only one original, the beeper sounds after the first original is on
the master. Set the second original and the desired image settings. Then,
press the {Start} key.
F
Enter the number of prints with the { { { { Number} } } } keys.
G
Make your prints.

Memory Mode With The Document Feeder

Note
To prevent original misfeeds, do not set originals of different sizes.
Do not set more than 30 originals at one time in the optional 30 originals doc-
ument feeder.
Printing Using The Optional 30 Originals Document Feeder
TSLS012N
P.8 "Shifting The Print Image Position To
TSLS011N
2
45