Table of Contents
Advertisement
OPERATION
E
Press the { { { { Proof} } } } key and check
the image density and the image
position of the proof print.
1
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys or the fine adjust-
ment dial. See
The Print Image Position".
If the image density is slightly
dark or light, adjust the image
density using the {W} or {V}
key. See
Print Image Density".
F
Enter the number of prints re-
quired with the { { { { Number} } } } keys.
Note
Up to 9999 prints can be entered
at one time.
To change the number entered,
press the {Clear/Stop} key and
enter the new number.
6
TSLS013N
P.8 "Adjusting
P.10 "Adjusting The
TSLS011N
G
Press the { { { { Print} } } } key.
Note
After printing is completed, the
same number of prints is auto-
matically set for the next job.
To stop the machine during the
multi-print run, press the {Clear/
Stop} key.
To return the machine to the ini-
tial condition after printing,
press the {Clear Modes} key.
TSLS014N
Advertisement
Chapters
Table of Contents
