Ricoh Priport JP1030 Operating Instructions Manual page 318

Note
❒ If the image position is not
correct, adjust it using the
{ { { { Image Position} } } } keys or the
fine adjustment dial. See p.18
"Adjusting the Print Image
Position".
❒ If the image density is slight-
ly dark or light, adjust the
image density using the { { { { W W W W } } } }
or { { { { V V V V } } } } key. See p.20 "Adjust-
ing the Print Image Density".
D Enter the number of prints
with the number keys.
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
tered, press the { { { { Clear/Stop} } } }
key and enter the new num-
ber.
E Press the { { { { Print} } } } key.
Standard Printing
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{ { { { Clear/Stop} } } } key. See p.24
"S t op pi n g a M ul t i - pr i nt
Run".
❒ To return the machine to the
initial condition after print-
i n g , p r e s s t h e { { { { C l e a r
Modes/Energy Saver} } } } key.
1
15