Ricoh Priport JP1030 Operating Instructions Manual page 203

SilverV-EN.book Page 35 Monday, May 15, 2000 3:23 PM
To Choose a Custom
Reproduction Ratio
A Press the { { { { Center/Edge Erase} } } }
key twice.
B Press the { { { {
select the original size and di-
rection.
C When you reach the desired
size and direction, press the
{ { { { q q } } } } key.
q q
C
D
E
} } } } or { { { { } } } } key to
F
TSLS01TN
Combine—Combining 2 Originals onto One Print
Press the { { { { Start} } } } key.
The beeper sounds after the first
original is on the master. Set the
second original face down.
Press the { { { { Start} } } } key.
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
ing the Print Image Position For-
ward or Backward") or the side
tray fine adjusting dial (see
P.10 "Shifting the Print Image Po-
sition to the Right or Left").
1
TSLS012N
TSLS012N
P.9 "Shift-
35