Ricoh Priport JP1030 Operating Instructions Manual page 195

SilverV-EN.book Page 27 Monday, May 15, 2000 3:23 PM
F
If you use the optional tape dis-
penser, turn on the tape dispenser
power switch.
O n
O f f
G
Press the { { { { Print} } } } key.
Note
Repeat steps A through C until
all originals are printed when
you set originals on the expo-
sure glass.
If you set originals into the op-
tional document feeder, origi-
nals are fed and prints are
completed automatically.
After the last page of each set is
fed out to the paper delivery
tray, the optional tape dispenser
drops a strip of paper on the top
of the paper stack. The next cy-
cle begins.
Auto Cycle—Printing from Several Originals at Once
TSLP013E
1
27