Remove Tags - Cabinet Model - Printronix P7000 Quick Setup Manual

Remove Tags – Cabinet Model
Remove Tags – Cabinet Model
NOTE: If you have the power paper stacker installed, skip this
Passive Stacker
Paper Fence
(if equipped)
Tie Wrap
Figure 9. Removing Tags from the Cabinet Models
1. Remove the tie wrap attached to the passive stacker paper
fence. The tie wrap is marked with a large, red tag.
2. Close the cabinet rear door.
16
procedure and go to "Remove The Shipping Restraints
From The Power Paper Stacker (If Equipped)" on page 17.
Red Tag