Printronix P7000 Quick Setup Manual page 64

Quick Setup Menu
•
DHCP. You can enable/disable the DHCP protocol using this
option, but consult your administrator for the appropriate
setting.
Active IGP Emulation
The Active Emulation menu enables you to activate either the PGL
or VGL emulation.
NOTE: This option applies to the P7000 only, not the P7000HD.
Ribbon End Point
This parameter adjusts the point at which the system will declare
the ribbon as being expended. The life count will always be from
100% to 0%, but if a darker setting is selected 0% will be reached
more quickly. If a lighter setting is selected, the system will extend
the time it takes to reach 0%.
Load Config.
The printer can store numerous configurations in memory. This
parameter allows you to select and load a specific configuration.
Save Config
This option allows you to save up to eight configurations to meet
different print job requirements. This eliminates the need to change
the parameter settings for each new job. The configurations are
stored in memory and will not be lost if you turn off the printer. If the
Protect Configs. parameter is enabled, the new configuration will
not be saved unless the existing configuration has been deleted
first. The factory default configuration cannot be changed.
Power Up Config
This option allows you to specify which of the nine configurations
(Factory or 1-8) will be the power-up configuration.
64