Set The Top-Of-Form
Every time you load paper, you set the top-of-form (TOF) location.
This procedure must be performed the first time paper is introduced
into the printer, and every time new paper is loaded.
1. Press ON LINE/CLEAR to place the printer in offline mode.
The LCD will display "OFFLINE / QUICK SET-UP."
2. Raise the platen lever as far as it will go. This allows you to turn
the vertical position knob freely to align the top-of-form.
Loading Paper (Standard Configuration)
Figure 27. Raising the Platen Lever
Set The Top-Of-Form
Vertical Position Knob
Platen Lever
37