Loading Paper (Standard Configuration) - Printronix P7000 Quick Setup Manual

Loading Ribbon And Paper
NOTE: If there are ink stained fingerprints on the ribbon barcode

Loading Paper (Standard Configuration)

When you start this procedure, verify that the printer cover is open,
the platen lever is raised, and the blue tractor doors are open. See
"Printer Component Locations" on page 8.
Figure 21. Aligning the Paper Supply
1. Prepare the paper supply:
Cabinet Model
a. Open the front door of the printer cabinet.
b. Place the paper supply inside the printer, on the floor of the
c. Align the paper supply with the front label on the floor of the
d. Ensure that the paper pulls freely from the box.
e. Feed the paper up through the paper slot.
NOTE: The P7220 and P7280HD model have a metal paper guide.
30
(located on the ribbon spool), wipe it clean with a soft cloth
or towelette moistened with alcohol.
Label
cabinet.
printer.
Load the paper on top of this guide.