Before You E-Mail/Log On/Fax/Call; Returns - Plextor PX-W1610TA Operation Manual

Appendix B: Technical Support

Before You E-mail/Log On/FAX/Call

Please gather as much of the following information as possible before contacting us.
The serial number and TLA number of your PlexWriter. Your serial number can
be found both on the warranty card that accompanied the drive and on a label on
the drive itself. The TLA number appears both on the drive label and on a sticker
at the rear of internal drives.
The version of Plextor Manager you are using, if applicable.
The latest version of firmware you loaded onto the drive, if applicable.
The version of the Windows, Mac, or UNIX operating system you are using.
The brand name and model number of your computer (e.g., Dell 466/NP, Micron
P66PCI Powerstation, ALR Evolution V, Apple Macintosh, Performa 575, etc.).
The type of VGA, Super VGA, or other graphics board you use.
Brand name and model number of any other peripherals you have installed or
connected to your computer (e.g., CD-ROM, scanner, fax board, network board).

Returns

You must receive an RMA (Returned Materials Authorization) number before any
Plextor drive can be returned for repair or replacement. Any drive sent to Plextor
without an RMA number will not be accepted.
You can contact our RMA Department and request an RMA number and RMA
forms at rmasupport@plextor.com, or by fax at 408-727-1522 or 208-730-8719.
Forms are also available on Plextor's web site, in the Support/Warranty section.
Drives must be sent postage prepaid. We recommend that you insure your shipment,
as Plextor cannot be held responsible for any damage that may occur during
shipment.
54
PlexWriter 16/10/40 Operation Manual