Using The Xm Tuner; Using The Touch Panel Keys - Pioneer F900BT - AVIC - Navigation System Operation Manual

Using the XM tuner

You can use the navigation system to control
an XM satellite digital tuner, which is sold se-
parately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
the navigation system which differs from that
described in the XM tuner's operation man-
ual.
Following XM satellite digital tuner units can-
not be connected:
GEX-P900XM, GEX-P910XM
Reading the screen
ALL CH MODE
1 2 3
6
8
9
CATEGORY MODE
4
5
5
About the logo for channel name
Only the logo data that is contained in the na-
vigation system can be displayed for each
channel. The logo of a newly established chan-
nel that is not contained cannot be displayed.
When no logo may be displayed, the following
substitute icon is displayed.
Substitute icon
1 Source icon
Shows which source has been selected.
2 XM band indicator
Shows the XM band that has been selected.
3 Preset number indicator
Shows what preset item has been selected.
4 XM channel number indicator
Shows the XM channel number the tuner is
currently tuned to.
5 XM channel category
Shows the category of broadcast channel.
6 XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in ALL CH MODE, and select a
channel from selected category in
CATEGORY MODE.
7 XM station name logo
p The message "ON THE AIR" disappears
if the navigation system cannot receive
XM tuner reception for some reason.
8 XM station name indicator
Shows the XM broadcast station name the
tuner is currently tuned in.
9 Detail information
Shows the detailed information of the broad-
cast channel currently being received.

Using the touch panel keys

% Touch [XM] on the "AV Source" menu
to display the "XM" screen.
= For details concerning operations, refer to
Screen switching overview on page 18.
Chapter
21
109
En