Using The Xm Tuner; Using The Touch Panel Keys; Selecting An Xm Channel Directly - Pioneer AVIC-X9115BT Operation Manual

Using the XM tuner

Shows the detailed information of the broad-
cast channel currently being received.

Using the touch panel keys

% Touch [XM] on the "AV Source" menu
to display the "XM" screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
ALL CH MODE
CATEGORY MODE
1 Memorize the current song
= For details, refer to Memorizing the song
on page 133.
2 Recall equalizer curves
= For details, refer to Recalling equalizer
curves on page 161.
3 Display the "Function" menu
= For details, refer to Using the "Function"
menu on page 134.
4 Recalling channels from the preset
Touch to recall the preset channel.
5 Perform manual tuning
1 2 3
4
5
6
7
8 9 a b
2 3
1
c
5
6
7
8 9 a b
The channels move up or down one at a
time.
p If you keep touching [c] or [d] you can
skip the broadcasting channels.
6 Select an XM band
Touch [Band] repeatedly until the desired
XM band is displayed: XM 1, XM 2 or
XM 3. This is useful for switching the preset
item.
7 Display the map screen
8 Preset key for receiving the traffic
audio service
= For details, refer to Using the direct traffic
announcement function on page 133.
9 Switching the XM channel select mode
You can switch the mode between the two
methods for selecting and listing the chan-
nel.
ALL CH MODE :
You can select a channel from all channels
when you operate this function.
CATEGORY MODE:
You can select a channel within a selected
category that you operate this function.
a Selecting an XM channel directly
= For details, refer to Selecting an XM chan-
nel directly on this page.
b Switching to the list display
You can select the desired channel from the
list display.
= For details, refer to Selecting a channel
from the list on the next page.
c Switching the channel category
Touch [c] or [d] to select the desired cate-
gory.

Selecting an XM channel directly

You can select an XM channel directly by en-
tering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers, touch [Clear].
Chapter
21
131
En