Setting The Slide Back Function; Setting The Automatic Open Function; Using The Aux Source; Switching The Background Display - Pioneer AVIC N1 - Navigation System With DVD player Operation Manual

screen on rear display or the video of the selected
source.
❒ The map screen navigation images output to
the rear display differ from standard NTSC for-
mat images. Therefore, their quality will be
inferior to the images that appear on the front
display.
1
Touch "REAR DISP" in the SETUP menu.
Each touch of the "REAR DISP" changes the
settings as follows:
• SOURCE — Display the video of the
selected source on rear display
• NAVI— Display the navigation video on
rear display when the navigation screen is
displayed on front
❒ When selecting "SOURCE" in "REAR
DISP", when the selected source is an
audio source, nothing is displayed on rear
display.
❒ When selecting Rear View, nothing is dis-
played on the left-hand side of the rear dis-
play.

Setting the slide back function

You can adjust the LCD panel slide position to
prevent the display from hitting the shift lever of
an automatic vehicle when it is in P (park) posi-
tion.
❒ Please be careful, as the LCD panel will slide
immediately after the setting is turned "ON".
1
Touch "FLAP SET BACK" in the SETUP
menu.
Touching "FLAP SET BACK" switches
between "ON" and "OFF".
Setting the automatic open
function
When you do not wish the display to open/close
automatically, you can set the automatic open
function to the manual mode.
1
Touch "AUTO FLAP" in the SETUP
menu.
Each touch of the "AUTO FLAP" changes
the settings as follows:
• MANUAL — You have to press OPEN/
CLOSE button to open/close the display
90
• AUTO — The display automatically opens/
closes when power to navigation unit is
turned on

Using the AUX source

An IP-BUS-RCA Interconnector such as the CD-
RB20/CD-RB10 (sold separately) lets you connect
navigation unit to auxiliary equipment featuring
RCA output. For more details, refer to the IP-BUS-
RCA Interconnector owner's manual.
Selecting AUX as the source
1
Touch the source icon and then touch
"AUX" to select AUX as the source.
When the source icon is not displayed, you
can display it by touching the screen.
If the auxiliary setting is turned "OFF", "AUX"
cannot be selected.
➲ Switching the auxiliary setting ➞ Page 86
Switching the background dis-
play
You can switch background displays while listen-
ing to each source.
1
Press ENT button.
Each time you press ENT button the display
changes in the following order:
Audio source
• NAVI (Normal wall paper) — AV (Video
input) — DVD (DVD video in the built-in
DVD drive)
Video source
• Video of currently selected source — NAVI
(Normal wall paper) — AV (Video input) —
DVD (DVD video in the built-in DVD drive)
❒ When the AV (Video input) setting is not
set to "VIDEO", the background display
will not switch to AV (Video input).
➲ Switching the AV input setting ➞ Page 89
❒ Only the REAR ON mode is active, the
background display will switch to DVD
(DVD video in the built-in DVD drive).
➲ Using the rear display ➞ "Hardware Man-
ual"
❒ During the memory navi mode, you cannot
switch to DVD (DVD video in the built-in
DVD drive).