Setting The Dimmer; Adjusting The Picture; Displaying The Firmware Version; Displaying The Open Source Licences - Pioneer AVIC-F980DAB Operation Manual

System settings

Setting the dimmer

Setting the dimmer trigger
The default setting is "Auto".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.

Auto:
Switches the dimmer to on or off automatically according to
your vehicle's headlight turning on or off.

Manual:
Switches the dimmer to on or off manually.

Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
The default setting is "Day".
p You can use this function when "Dimmer Trigger" is set to
"Manual".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.
 Day:
Turns the dimmer function to off.

Night:
Turns the dimmer function to on.
Setting the dimmer duration
optional
You can adjust the time that the dimmer is turned on or off.
The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
p You can use this function when "Dimmer Trigger" is set to
"Time".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
4 Drag the cursors to set the dimmer duration.
 You can also set the dimmer duration touching
or .
p The time display of the dimmer duration adjusting bar is
depending on the clock display setting.
 Refer to Setting the time and date on page 69

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the handbrake.
1 Display the screen you want to adjust.
2 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.

Brightness:
Adjusts the black intensity. (–24 to +24)
 Contrast:
Adjusts the contrast. (–24 to +24)

colour:
Adjusts the colour saturation. (–24 to +24)
 Hue:
Adjusts the tone of colour (which colour is emphasised, red
or green). (–24 to +24)

Dimmer Level:
Adjusts the brightness of the display. (+1 to +48)

Temperature:
Adjusts the colour temperature, resulting in a better white
balance. (–3 to +3)
p With some pictures, you cannot adjust "Hue" and "colour".
 When you touch [Rear View] or [2nd Camera],
the mode changes to the selected camera mode.
By touching [Source], [Navi] or [Apps], you can
return to the selected mode.
5 Touch , , , to adjust.
p The adjustments of "Brightness", "Contrast" and "Dimmer
Level" are stored separately for the on/off status of the dim-
mer function. These are switched automatically depending
on whether the dimmer function is on or off.
p The picture adjustment may not be available with some rear
view cameras.
p The setting contents can be memorised separately.
Displaying the firmware
version
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [System Information].
3 Touch [Firmware Information].
Displaying the open source
licences
You can check the open source licenses of the functions that this
product is equipped with.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [System Information].
3 Touch [Firmware Information].
4 Touch [Licence].

Updating firmware

CAUTION
 The external storage device for updating must contain only
the correct update file.
 Never turn this product off, eject the SD memory card or
disconnect the USB storage device while the firmware is
being updated.
61