Setting Of The Display Contrast; Full Name Of Output Pins - ABB 500 Operating Instructions Manual

Chapter 3 - Handling of Control Panel CDP 31x

3.10 Setting of the Display Contrast

3.11 Full Name of output pins

IV A
3 - 12
Step Function
1. To enter the Function Mode.
2. To select a function.
3. To enter contrast setting func-
tion.
4. To set the contrast.
(1...7)
5. To accept the selected value.
Step Function
1. To display the full name of the
three actual signals press key
and hold
2. To return to the Actual Signal
Display Mode release key.
3ADW000055R0401_DCS500B_Operating Instruction_e_d
Press key
FUNC
ENTER
ENTER
Press key
ACT
ACT
DCS 500B / DCP 500B Operating Instructions
Display after key is
pressed
0 L 0.0 rpm 00
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 7
0 L 0.0 rpm 00
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 7
0 L 0.0 rpm 00
CONTRAST [7]
0 L 0.0 rpm 00
CONTRAST [4]
0 L 0.0 rpm 00
CONTRAST 4
Display after key is
pressed
0 L 0.0 rpm 00
SPEED ACT FILT
CONV CURR ACT
U ARM ACT
_
0 L 0.0 rpm 00
SPEED AC 0.0 rpm
CONV CUR 0 A
U ARM AC 0 V
_