ABB 500 Operating Instructions Manual page 47

DCS 500B / DCP 500B Operating Instructions
Depending on the drive´s condition and the status of the commis-
sioning, UPLOAD has to take place before DOWNLOAD, otherwise
a warning may be displayed:
**WARNING**
NOT UPLOADED
DOWNLOADING
NOT POSSIBLE
The drive must be in stopped state during the DOWNLOAD proc-
ess, otherwise the following warning is displayed.
**WARNING**
DRIVE IS RUNNING
DOWNLOADING
NOT POSSIBLE
The drive that receives the downloaded parameters must have a
compatible software version to the drive from which the parameters
were uploaded. Otherwise the panel will display a warning:
**WARNING**
DRIVE UNCOMPATIBLE
DOWNLOADING
NOT POSSIBLE
Step Function
1. To enter the Function Mode
2. To select a function.
3. To activate the selected func-
tion.
4. Loading complete.
3ADW000055R0401_DCS500B_Operating Instruction_e_d
Chapter 3 - Handling of Control Panel CDP 31x
Press key
FUNC
ENTER
Display after key is
pressed
0 L 0.0 rpm 00
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 7
0 L 0.0 rpm 00
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 7
0 L 0.0 rpm 00
=> => => => => => =>
DOWNLOAD
0 L 0.0 rpm 00
SPC:OUT 0.0 %
_
CONV CUR 0 A
U ARM AC 0 V
IV A
3 - 11