Camera Settings Relating to MPEG-4 Image
Set the "Max bit rate (per 1 client)" setting of the camera as below according to the setting of "Performance (Drawing
efficiency)". When the set value for "Max bit rate (per 1 client)" is larger than the values below, this software may not
work correctly. Refer to page 144 about the "Performance (Drawing efficiency)" setting.
Performance (Drawing efficiency)
High
Middle
Low
Trademarks and Registered Trademarks
®
• Microsoft
, Windows
other countries.
®
®
• Intel
and Pentium
®
• Adobe
, Adobe logos, and Acrobat
or other countries.
• Other names of companies and products contained in these operating instructions may be trademarks or regis-
tered trademarks of their respective owners.
Limitation of Liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS
PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
8
Max bit rate (per 1 client)
1 024 kbps or less
512 kbps or less
256 kbps or less
®
®
and Windows
XP are registered trademarks of Microsoft Corporation in the U.S. and/or
are trademarks of Intel Corporation.
®
are registered trademarks of Adobe Systems Incorporated in the U.S. and/