Import Motion Images
It is possible to import files of recorded motion images from an external source to play them back on this software.
Step 1
Select "File(F)" - "Import a motion image file(I)..." from
the menu bar or click the [Import a motion image file]
button on the tool bar.
The "Import a motion image file" window will be dis-
played.
q
w
Perform the following settings:
q "File name"
The selected file name will be displayed.
w "Files of type"
Select a suitable file type to the recorder.
ND300
n3r file
HD300
h3r file
e [Open] button
The selected file will be imported.
r [Cancel] button
The file import will be cancelled and the window will
be closed.
98
Step 2
Select a desired file and click the [Open] button.
The selected file will be copied into the folder of this
software.
The imported files can be checked on the list window
or other windows.
Notes:
• The files will be copied in the directory of "C:\WV-
AS65DataFile\ImportData". Prior to importing,
check that the capacity of the C drive is enough to
hold the image file.
• The recorder title will not be displayed on the file
list window, playback window or others when the
motion image was imported from an unregistered
e
r
recorder.
• It is impossible to operate the unit while importing
images.
•
ND300
It is impossible to import an image file whose size
is 2 GB or more.
•
HD300
An audio attached file (extension .h3a) cannot be
selected alone. It is possible to import when a file
(h3a) is contained with the same name as the
selected motion image file (h3r) within a folder.