Switch User - Panasonic WV-AS65 Operating Instructions Manual

<Example>
It is possible to perform the settings for a specific user as follows:
Recorder A: When registering the user, set all cameras as operable for this user.
Recorder B: When registering the user, set cameras 1, 2 and 3 as operable for this user.
Recorder C: Do not register any users.

Switch user

It is possible to switch a user who is currently logging
in without exiting this software.
Step 1
Select "Switch user(U)..." from "Tool(T)..." on the
menu bar.
The login window will be displayed.
Step 2
Enter the registered user name and the password.
24
PC: User1
Recorder C
PULL
1 2 3 4
SHIFT
5 6 7 8
9 10/0 11 12
HDD 1
13 14 15 16 Digital Disk Recorder
HDD 2 316
WJ-HD
Cannot log into the recorder
Recorder A
PULL
HDD1 HDD2 HDD3 HDD4
Network Disk Recorder
WJ-ND
All cameras are operable
Recorder B
PULL
HDD1 HDD2 HDD3 HDD4
Network Disk Recorder
WJ-ND
Only camera1, 2 and 3 are operable
Step 3
Click the [OK] button.
The operation window in the network mode will be dis-
played.
Notes:
• When the logged in user had registered a favorite,
the registered favorite will be displayed.
• When "Local mode(L)" is selected for "Default
screen" on the general tab of the option window,
the list window in the local mode will be displayed.
When the message window is displayed after the [OK]
button is clicked, check the descriptions of "Displayed
Message and Solutions" on page 150.