Copying (Duplicate)
It is possible to manually copy (duplicate) the recorded images to the HDD copy area or the external recording
device (DVD-RAM disk, DVD-R disk, CD-R disk, SD card, external HDD)
Step 1
Displays the images from the desired recorder.
Refer to page 43 for descriptions of how to display live
images.
Note:
When another user is copying or the current copy-
ing is not yet completed, it is impossible to start any
new copying. Check that the [COPY] indicator is
not lit.
When the [COPY] indicator is lit, copying is being
performed.
Step 2
Click the [RECORDER] control tab.
The recorder control panel will be displayed.
Step 3
Click the [COPY] button.
The copy window will be displayed.
Note:
This button will become unavailable when the
recorder in use is the WJ-ND200.
HD300
connected to the recorder.
Step 4
Designate the time range "FROM(F)" - "TO(T)" of the
recorded images to be copied.
Notes:
• The available time range (duration from the start
point "FROM(F)" to the end point "TO(T)") for copy-
ing may differ depending on the model of the
recorder in use. Refer to the operating instructions
of the recorder in use.
• Do not designate a time range wider than the time
range described on the operating instructions.
Step 5
Select the camera channels used to record images to
be copied.
Note:
To select all the camera channels, check the "ALL
(A)" box. To select only the desired camera chan-
nels, check the "Per camera(P)" box. Check the
boxes of the desired camera channels from which
images are to be copied.
71