Operate The Recorder - Panasonic WV-AS65 Operating Instructions Manual

Operate the Recorder

Start/stop the manual recording
Step 1
Displays the images from the desired recorder.
Refer to page 43 for descriptions of how to display live
images.
Step 2
Click the [RECORDER] control tab.
The recorder control panel will be displayed.
Step 3
Click the shutter on the recorder control panel. The
[REC] button and the [REC STOP] button will be dis-
played.
70
Step 4
Click the [REC] button.
Recording will start and the [REC] indicator will light
red.
Note:
When the version of the recorder in use is the fol-
lowing, it is impossible to recognize which channel
is currently being recorded. (When recording starts
on a channel, the REC indicators of all channels
will light.) Refer to the operating instructions of the
recorder for how to check the version of the
recorder.
: Any version
HD300
WJ-ND300: Older than ver. 3.00
<Stop recording>
Step 5
Click the [REC STOP] button.
The recording will be stopped and the [REC] indicator
will go off.
HD300
When stopping manual recording while another record-
ing with a different recording mode (eg. event record-
ing) is being performed, the [REC] indicator will remain
lit and the other recording will continue. Refer to the
Network Operating Instructions (PDF) of the recorder
for further information about the recording mode.