Panasonic WV-AS65 Operating Instructions Manual page 30

q Status icons
Indicates that the status of the image currently dis-
played or the connection with the recorder.
Icons Descriptions
Indicates that live images are being displayed
When failed to connect to the camera under the configuration that images from the camera are to be
received directly, a cause of failure will be displayed by moving the mouse pointer onto the operation
window (excluding the image display area).
<Connection failure: Camera connection failure>
The following may be possible.
• A wrong IP address of the camera is registered in the recorder.
• The network is down.
• Number of users who are currently accessing the camera is more than the possible access num-
ber.
<Connection failure: Port number duplication>
The port number used for multicast is also used for the other. Change the port number of the camera
for multicast not to be used for any other port.
<Connection failure: Camera authentication failure>
Failed to log in the camera. The user name and the password for the camera may be incorrectly regis-
tered in the recorder. Check the information of the camera registered in the recorder.
Indicates that recorded images are being displayed
A black screen may be displayed when the images of the selected camera cannot be seen due to the
settings (e.g. camera settings, etc) even though the icon indicates playback status. Live images will
be displayed for the channel with no recorded images even though the icon indicates playback status.
Indicates that the connection with the recorder has failed
It is possible to display the reason why the connection has failed by placing the cursor on this icon.
<Download failure: Time-out>
The network settings such as the IP address may be wrong or the connection may have been lost.
Check the settings of the recorder registration. (page 129)
<Download failure: Authentication failure>
Login to the recorder failed. When trying to log into the recorder as the administrator, check whether
the password for the administrator has been registered correctly when registering the recorder. (page
129) When trying to log into the recorder not as the administrator, check whether the user name and
the password have been registered on the recorder correctly.
* It is also possible that the recorder restarted after detecting a power outage, or the recorder is in the
process of SD memory data obtainment. In this case, display live images again by dragging and
dropping a recorder icon or a camera icon onto the image display area after the restart of the
recorder or the SD memory data obtainment is complete.
<Download failure: Maximum concurrent access>
Number of concurrent accessing users reached the maximum access number.
No icon Indicates that no images are being displayed (black screen).
30