User Settings Admin - Panasonic WV-AS65 Operating Instructions Manual

User Settings
Register the users with their information
Step 1
Display the operation window in the network mode.
Step 2
Select "User(U)..." from "Setup(O)" on the menu bar.
The "User" window will be displayed.
q
w
Perform the following settings:
q "Registered user(U)"
The registered user name, user type and comment
will be displayed.
w [Add (A)...] button
Click this button to add a user.
e [Delete(D)...] button
Click this button to delete a registered user.
r [Property(P)...] button
Click this button to edit user information.
t [Close (C)] button
The window will be closed.
ADMIN
ADMIN
e r t
Step 3
Click the [Add(A)...] button.
The "Property" window will be displayed.
q
w
e
r
t
Perform the following settings:
q "User name(U)"
Enter the user name. The entered user name is
required to log in.
Enter 4 to 14 alphanumeric characters.
w "Password(P)"
Enter the password. The entered password is
required to log in. Entered password will be dis-
played as "*".
Enter 4 to 8 alphanumeric characters.
e "Enter password again to confirm.(C)"
Enter the same password entered for "Password
(P)" again. Perform confirmation of the entered
password.
r "User type(T)"
Assign a user type to the user from "Type1 - 5".
The default setting is "Type2". Refer to page 134
for details about how to define the available opera-
tions on the user type window.
t "Comment(O)"
It is possible to add comments about the user.
Enter up to 64 alphanumeric characters.
It is not necessary to add comments.
y [OK] button
Click this button to save the settings and close the
property window.
u [Cancel] button
Click this button to cancel saving of the edited set-
tings and close the property window.
y u
131