Notification Of Error - Panasonic WV-AS65 Operating Instructions Manual

Notification of Error

The error notification will be displayed in the pop up window when the occurrence of an error is notified by the
recorder.
Note:
This function will not work when the downloader is closed. Always run the downloader, but, the main application
does not need to run all the time.
<Perform the settings of the error notification
Perform the following settings to activate the error notification function.
G Settings of this software
Check the [Error(E)] box for [Pop-up notification] on the option window.
Refer to page 142 for further information.
HD300
Check the [Interval(I)] box on the recorder registration window of this software to acquire error notification..
Refer to page 122 for further information.
G Settings of the recorder
ND300
Perform settings for the Panasonic Alarm Protocol. Refer to the operating instructions of the recorder in use.
HD300
No setting is required.
Error log window
The error log window will be launched when an error log is received. It is also possible to open this window by
selecting "Tool(T)" - "Error notification log(E)" from the menu bar.
q "Time & Date"
The time and date when the error took place
w "Recorder"
The recorder name in which the error took place
e "CH"
The camera channel in which the error took place
112
q w e r
t
r "Event"
Error description
t [Save(S)...] button
Click this to save the error notification log in the
CSV format.
y [Close(X)] button
The window will be closed.
>
ADMIN
ADMIN
y