Panasonic WV-AS65 Operating Instructions Manual page 125

The message window may be displayed when the [OK]
button is clicked. When the message window is dis-
played by clicking the [OK] button, refer to the page
151 and follow the descriptions.
Note:
When the [OK] button is clicked without performing
the connection test, the recorder registration will
not be completed.
It is impossible to operate the recorder until the
obtained model number using the connection test
is registered. A message will be displayed when
trying to operate without completing the registra-
tion.
Refer to page 129 for the descriptions of how to
register the recorder.
Perform the settings of the cameras
It is possible to edit the title, type
ting . The camera title will be displayed to identify cameras in each window of the main application. The icon
ND300
of the camera differs depending on the type of the camera.
ND300
The camera information obtained by the connection test will be applied.
There are 2 methods to perform the settings of the cameras:
• Perform the settings of all the cameras connected to the recorder (page 126)
• Perform the settings of the cameras independently (page 128)
Notes:
• When the registration of the recorder is not completed, it is impossible to perform the settings of the connected
cameras.
• When the settings are edited while displaying images, the edited settings will not be applied until the camera
channel is allocated to the image display area again.
of the camera connected to the recorder, or the "Live image reception" set-
HD300
Step 9
Check whether the recorder is registered correctly.
Click the [RECORDER] tab on the operation window in
the network mode. When the icon of the registered
recorder is displayed in the tree view, the recorder is
registered correctly.
125