Panasonic WV-AS65 Operating Instructions Manual page 148

Symptom
When displaying MPEG-4
images on a multi-screen,
images from two cameras or
more are displayed in
sequence on a single area.
PC does not enter the sys-
tem standby mode or the
system hibernation mode.
148
Cause/solution
• This may occur due to the display adapter and driver
combination.
a When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select "Properties"
from the displayed pop-up menu.
2. Select "Settings" from "Display Properties", and
then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the
DirectDraw acceleration by adjusting the level of
"Hardware acceleration".
Note:
When the DirectDraw acceleration is disabled, images
from/via the WJ-HD300 series digital disk recorder
may be displayed distorted.
• While running this software, the PC will not move to the
system standby mode or the system hibernation mode.
Reference
pages
–
–