Panasonic WV-AS65 Operating Instructions Manual page 32

(6) Recorder status display area (9-split/16-split screen)
q Alarm indicator
Lights when an alarm has occurred. It is impossible
to reset the alarm status display when displaying
images on a 9-/16-split screen. Display images on
a single/4-split screen to reset the alarm status dis-
play.
(7) Camera control panel
q [ZOOM] box
Zooming can be adjusted by clicking the [WIDE]
button or the [TELE] button.
w [FOCUS] box
Focusing can be adjusted by clicking the [NEAR]
button or the [FAR] button.
The auto focus function can be performed by click-
ing the [AUTO] button.
e [AUTO] box
The auto function of the camera will start by click-
ing the [ON] button.
The auto function can be stopped by clicking the
[OFF] button.
r Control pad
Clicking the buttons around the control pad can
move (pan/tilt) a camera in the clicked direction.
Clicking inside the control pad also can adjust the
32
w Recording indicator
q e
w
t [IRIS] box
y [PRESET] box
q
w
Lights when recording images.
r
vertical/horizontal position (pan/tilt) of the displayed
image. Panning/tilting speed will be faster if a
clicked point gets farther from the center point of
the control pad.
Iris can be adjusted by clicking the [CLOSE] button
or the [OPEN] button.
To reset the iris settings, click the [RESET] button.
Click the [SET] button after selecting a preset num-
ber by clicking the button. Registering preset posi-
tions is necessary to perform the preset function.
Note:
Refer to the operating instructions of the recorders
and cameras in use about preset settings.
t
y