Panasonic WJ-ND300A Setup Instructions page 98

Symptom
Some contents are not dis-
played on the browser.
The image is not being
refreshed.
When displaying MPEG-4
images on a multi-screen,
images from two cameras or
more are displayed in
sequence on a single area.
98
Cause/solution
• Reload the contents by pressing the [F5] key.
• Depending on the traffic of the network, there might
be difficulties in displaying images. Press the [F5] but-
ton on the keyboard to request images.
• Images recorded at low recording rate (less than
1 ips) may sometimes not be refreshed.
• This may occur due to the display adapter and driver
combination.
a When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. After closing all browser windows, right-click on
the desktop and select "Properties" from the dis-
played pop-up menu.
2. Select "Settings" from "Display Properties", and
then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the
DirectDraw acceleration by adjusting the level of
"Hardware acceleration".
Reference
pages
–
–
–