Camera Network Settings And Group Settings [Camera Setup] - Panasonic WJ-ND300A Setup Instructions

Camera Network Settings and Group Settings [Camera Setup]

Performs network settings such as camera IP address and port number, and group settings.
Screenshot 1
Click "Camera Setup" on the setup menu (Quick) to dis-
play the camera setting window.
Setup items
I NW Camera Setup
Perform the network camera settings such as the cam-
era IP address and the port number. The following win-
dow will be displayed when the [SETUP] button is
clicked.
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.
30
Step 1
Click the [SETUP] button and perform the settings for
each item.
Refer to the following for further information about the
settings for each item.
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select a camera number and image compression
method.
[ADDRESS]
Enter an IP address. Enter up to 255 alphanumeric
characters.
[Port Number]
Set the http port number used by the camera. A number
from 1 - 65535 is available.
[GROUP]
Select the group to which the camera is assigned (G1 -
G8).
[CAM TITLE]
Set the camera title displayed on the [Cam Select] tab,
etc. Enter up to 16 alphanumeric characters except the
following: ! $ % ' < = > @ [ \ ] ^ _ ` { | } ~