Panasonic WJ-ND300A Setup Instructions page 63

Network disk recorder
Hide thumbs Also See for WJ-ND300A:
Table of Contents

Advertisement

Setup items
[The Method of Sequence]
Select "SPOT" or "4 Screens" for "The Method of
Sequence".
[SPOT] [4 Screens]
When the [SETUP] button for the selected method is
clicked the following window will be displayed. Perform
the settings on this window. Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
Note:
When the image compression method of the camera
selected for a camera channel is "MPEG-4", the
respective sequence step will be skipped.
[CAM]
Select a camera image to be displayed at each step
from the following.
- -: Skips the selected step.
CAM1 - 32: Displays an image from the selected cam-
era channel on a single screen (SPOT).
4A - 4H: Images of the camera group (A-H) consisted
from 4 camera channels in advance will be switched
and displayed sequentially on a 4-Screen.
The camera group settings can be performed on the
"Monitor Display" settings of the setup menu
(Advanced) ("System" – "Basic Setup" – "Monitor
Display"). Refer to page 42 for further information.
[PRESET]
Enter a preset position (blank, 1 to 256). When no posi-
tion is entered (blank), the camera does not move to
any preset position.
[DWELL]
Select an interval time to go to the next sequential step
from 1 - 30 seconds (in 1-second interval).
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents