Operations Flow - Panasonic WJ-ND300A Setup Instructions

Operations Flow

The operation flow of this unit is as follows.
z
Rack Mounting
x
Connections
c
v
Network settings of this unit
b
Network settings of the PC
n
Format (initialize) hard disk drives
Display the camera setup menu and
m
perform the network settings of
cameras. (page 30)
,
Setup (pages 26 - 88)
Start operation
Startup
(page 8)
(page 10)
(page 92)
Install the unit in the rack.
Refer to the Installation Guide for further information
about rack mounting.
Refer to the provided Installation Guide for further infor-
mation about connections.
Turn on the power of the unit.
For further information, refer to the Installation Guide.
Operate the buttons on the front panel of the unit to per-
form the network settings of the unit.
Change the TCP/IP setting of the PC to conform to the
settings of this unit.
Display the disk configuration menu and format the
hard disk drives.
Refer to the Setup Instructions (PDF) for descriptions of
how to display the camera setup menu.
Perform the required settings on the setup menu to
start operation.
7