Panasonic WJ-ND300A Setup Instructions page 58

Setup items
I Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
I New Time Table Setup
Perform the settings of the following item for each time
zone.
[START]
Set the start time of the time zone.
[END]
Set the end time of the time zone.
[Program]
Select the desired "Program".
[MODE]
Select the alarm mode to be activated at an alarm
occurrence from the following.
ADM (Activity Detection Mode): Performs only record-
ing, writing an event log and camera movement to a
preset position at an event occurrence. Other event
actions will not be performed.
ALM (Alarm Mode): Performs every event action
according to the settings.
OFF: Performs only recording of the event log. Other
event actions will not be performed.
[FTP Send by Periodic Timer]
Perform the "FTP Send by Periodic Timer" settings of
the setup menu ("Comm" – "FTP Setup") first (page 71),
and select "ON" or "OFF" to determine whether or not to
send images to the FTP server periodically.
[FTP Send by Alarm]
Select "ON" or "OFF" to determine whether or not to
send images to the FTP server at an event occurrence.
(page 72)
[ALARM MESSAGE]
Select "ON" or "OFF" to determine whether or not to dis-
play the pop-up window that notify of an alarm occur-
rence with a message when an alarm occurs.
58
[Panasonic protocol]
Select "ON" or "OFF" to determine whether or not to
notify of an alarm occurrence (or error information) to a
PC according to the "Panasonic Alarm protocol" of the
setup menu ("Comm" – "Panasonic Alarm protocol")
(page 74).
To receive a notification (or error information) and dis-
play the contents of the notification, the optional soft-
ware (WV-AS65) is necessary.
[ALARM MAIL]
Select ON or OFF to determine whether or not to send
an alarm mail at an event occurrence.
Refer to page 73 for descriptions of how to use the mail
function such as the settings of the mail server address
and the mail address of the recipient. Refer to the
Operating Instructions (PDF) for further information
about the contents of the alarm mail.
[WARNING REPORT MAIL]
Select ON or OFF to determine whether or not to send
an error mail when a problem occurred. Refer to page
73 for descriptions of how to use the mail function such
as the settings of the mail server address and the mail
address of the recipient. Refer to the Operating
Instructions (PDF) for further information about the
warning report mail.
Notes:
• The start time and end time can be set in 1 minute
intervals. (The end time should be at least 15 min-
utes later than the start time.)
• Time from "23:46" to "23:59" are unavailable for the
start time.
• To copy a timetable that is set for a different day of
the week, select "Copy the Other Time Table" and
select a day of the week in step 2.
• When the [CLEAR] button is clicked in step 2, the
settings will be canceled.
• Repeat steps 1-4 to set programs of another day of
the week.