Panasonic WJ-ND300A Setup Instructions page 66

Basic settings relating to DNS [DNS Setup]
Basic network DNS settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click "DNS Setup" to display the "DNS Setup"
window.
66
Step 1
Perform the settings for the following items.
I DNS Setup
Select "MANUAL" or "AUTO" to enable IP address
searching by the host name using the DNS. Select
"OFF" when not using the DNS.
Selecting "AUTO" is available only when "ON" is select-
ed for "DHCP" (using the DHCP server).
Selecting "MANUAL" is available regardless of the set-
ting for "DHCP" (with or without using the DHCP serv-
er).
When "MANUAL" is selected for the DNS, enter the
DNS server addresses in "Primary" and "Secondary".
Enter 4 units from the decimal numbers (0-254).
I Domain Name
Enter the domain name of this unit. Enter up to 255
alphanumeric characters including hyphens (-) and peri-
ods (.).
Note:
The first character of the domain name should be an
alphabetical character.
Step 2
Click the [SET] button after completing the settings.