Perform The Settings For Network [Network Setup] - Panasonic WJ-ND300A Setup Instructions

Perform the Settings for Network [Network Setup]

Basic settings for a network connection can be performed with this menu.
Screenshot 1
Click the "Network Setup" on the setup menu (Quick).
The "Network Setup" window will be displayed.
Setup items
I NW Link down detection
Select "ON" or "OFF" to enable or disable the network
line disconnection detection for the CAMERA/client PC
port on the rear of the unit.
ON: Detects if the disconnection of the network line
connected to the CAMERA/client PC port occurs.
OFF: Does not detect the network line disconnection.
I HTTP Port Number
Specify the HTTP port number to be used to send
images from the unit. A number from 1 - 65535 is avail-
able.
It is unnecessary to change it for normal use.
Notes:
• Depending on the network settings of the LAN or
Internet service provider, network communication
may not be established if the http port number has
been changed. In this case, refer to the administra-
tor of the network.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
• The following port numbers and the port numbers
used for the FTP port, the site alarm settings, and
the port forwarding are unavailable for the HTTP
port number.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110,
123, 161, 162, 546, 547, 995, 10001, 10002, 10003,
10004, 10005, 10006, 10007
I FTP Port Number
Specify the FTP port number to be used.
Note:
The following port numbers and the port numbers
used for the HTTP port, the site alarm settings, and
the port forwarding are unavailable for the FTP port
number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123,
161, 162, 546, 547, 995, 10001, 10002, 10003, 10004,
10005, 10006, 10007
35