Performing The Network Settings; Performing The Network Settings Of This Unit - Panasonic WJ-ND300A Setup Instructions

Network disk recorder
Hide thumbs Also See for WJ-ND300A:
Table of Contents

Advertisement

Performing the Network Settings

With the following network environment, it is not necessary to perform the network settings. It is possible to perform
the settings or operate this unit using a web browser after completing the connection.
IP Address:
192.168.1.2 - 192.168.1.249, 192.168.1.251 - 192.168.1.254
Subnet mask:
255.255.255.0
Gateway Address: 192.168.1.1
When the network settings are different from the settings above, perform the network settings of this unit and the
PC.
It is necessary to display the camera setup menu to perform the network settings of cameras. It is possible to display
the camera setup menu on the "NW Camera Setup" menu of the setup menu ("Camera" – "NW Camera Setup").

Performing the Network Settings of this Unit

Perform the following settings relating to network.
Operate the buttons on the front panel of the unit to perform the network settings of the unit. The settings items will
be displayed on the LCD.
• DHCP
• IP Address
• Subnet mask
• Gateway
• HTTP port
The default network settings of each port are as follows.
DHCP
IP address
Subnet mask
Gateway
HTTP port
Important:
Network settings for each port (IP address, etc.) should be on a different subnet. Otherwise, network communica-
tion may be failed.
Screenshot 1
Start operation when the standby display is displayed
on the LCD.
8
Camera port
Client PC port
OFF
OFF
192.168.0.250
192.168.1.250
255.255.255.0
255.255.255.0
192.168.1.1
80
Maintenance port
192.168.2.250
255.255.255.0
Step 1
Display the IP address setup display by pressing the
arrows button (C or D).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents