Panasonic AG-HPX250 Operating Instructions Manual page 133

SCENE FILE screen (continued)
Item
DETAIL CORING Adjusts the level of noise reduction of the detail signal.
– 7 ...0
• Adjust towards – for a clearer image. Noise increases
slightly.
• Adjust towards + for less noise.
CHROMA LEVEL Adjusts the chroma level.
– 7 ...0
CHROMA PHASE Makes fine adjustments to the chroma phase.
– 7 ...0
COLOR TEMP Makes fine adjustments to the color temperature (after
Ach Ach white balance adjustment).
– 7 ...0
COLOR TEMP Makes fine adjustments to the color temperature (after
Bch Bch white balance adjustment).
– 7 ...0
MASTER PED Adjusts the black master pedestal that serves as the video
reference.
– 100 ...+15
A. IRIS LEVEL Sets the AUTO IRIS target value.
– 10 ...0
DRS Sets whether to operate the DRS (dynamic range
stretcher) function.
ON, OFF
DRS EFFECT Sets the compression level in high-brightness areas of the
DRS (dynamic range stretcher) function.
This function compresses the video signal level to extend
the dynamic range making it possible to correctly render
highlight areas without overexposure and loss of detail
that would otherwise occur.
1, 2, 3
• Higher numbers mean a higher compression level of
high-brightness areas and more noise in dark areas.
GAMMA Selects the gamma curve.
HD NORM:
Gamma setting for HD recording.
LOW:
Applies a gently rising gamma curve to lowbrightness
areas for a balanced look.
SD NORM:
Normal video setting inherited from the DVX100 series.
HIGH:
Applies a steep gamma curve to low brightness areas to
expand the tonality of dark areas for video with greater
brightness. Contrast softens as a result.
B.PRESS:
Produces sharper contrast than LOW.
CINELIKE D:
Applies a gamma curve to produce video with a cine-like feel.
CINELIKE V:
Applies a gamma curve to produce high-contrast video
with a cine-like feel.
• A lens aperture set lower than normal video level
(approx. 1/2) is recommended when using cine-like
gamma to enjoy the full benefit of the function.
*1: The factory default when the SCENE FILE dial is set to F1.
___indicates the factory setting.
Setting
... +7
*1
... +7
*1
... +7
*1
... +7
*1
... +7
*1
... +100
*1
... +10
*1
*1
*1
*1
Notes
• Values change quickly when
the Operation lever is held in
the ▲ ▼ direction.
• When using 1080i, the DRS function
is not available if shooting with 24P,
30P, 25P, or VFR (variable frame
rate) even if you select ON.
• A change in settings during
DRS operation will not change
video quality.
133