Panasonic AG-HPX250 Operating Instructions Manual page 57

• Pressing the MENU button fixes the current
settings and closes NAME EDIT.
• Values that have been fixed are maintained
even if the power is switched OFF or the
dial is changed. The settings for all items in
scene files are also maintained in the same
way.
■
Example 2: Save the F1 scene file to the
camera-recorder.
1
Select the menu option LOAD/SAVE/INIT in
the SCENE FILE screen, then press the SET
button on the Operation lever.
• Comfirm SCENE FILE F3 display or not.
• For details on menu operation, refer to "Using
the setup menus" (Page 28 of Vol. 1).
SCENE FILE F3: SPARK
LOAD SAVE INIT
VFR
FRAME RATE
SYNC SCAN TYPE
(SYNCHRO SCAN)
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
PUSH MENU TO RETURN
2
Select SAVE and press the SET button on
the Operation lever.
SCENE FILE F3: SPARK
LOAD SAVE INIT
VFR
FRAME RATE
SYNC SCAN TYPE
(SYNCHRO SCAN)
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
PUSH MENU TO RETURN
3
Select YES when the screen below is
displayed, and press SET on the Operation
lever.
• To return to the menu level above, press the
MENU button.
FILE F3: SPARK
SAVE ?
YES
NO
• "PROCESSING" appears and the following
message is shown when all settings have
been completed.
RETURN
LOAD
SAVE
INITIAL
0
0
0
0
RETURN
LOAD
SAVE
INITIAL
0
0
0
0
PUSH SET ( )
SAVE
COMPLETED !
• After changing the scene file settings, to return
to the settings to the previously saved values,
select LOAD in step 2 and perform the operation
described in step 3.
• To return the scene file settings to their factory
defaults, select INITIAL in step 2 and perform the
operation described in step 3.
• To save and read user file settings or return them
to their factory defaults, open the setting menu
OTHER FUNCTIONS screen and run USER FILE
in the same way as when handling scene files.
57