Switching The Thumbnail Display - Panasonic AG-HPX250 Operating Instructions Manual

Thumbnail operations (continued)

Switching the thumbnail display

The display can be switched so that only those
clips matching the specified conditions are
displayed in the thumbnail screen.
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button.
The thumbnail menu appears.
MENU button
3
Select THUMBNAIL from the thumbnail
menu.
Switch the thumbnail display by selecting one
of the following items:
80
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips. At this time the
thumbnails appear in selected order.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted in
the specified slot.
When this item is selected, SLOT1 to SLOT2 are
displayed as a sub-menu. Select the desired slot
to display the clips.
SETUP:
Please refer to "Setting the thumbnail display
mode" (Page 92) for information about this item.
EXIT:
Close the sub-menu.