Outputting The Time Code Externally - Panasonic AG-HPX250 Operating Instructions Manual

Using time data (continued)

Outputting the time code externally

To output time code from the camera-recorder's TC
OUT connector to a VTR or other recording device
in sync with camera-recorder picture or playback
picture, set the setting menu TC VIDEO SYNC
(OUTPUT SEL) to VIDEO OUT.
Set the menu option GL SELECT to HD SDI or
COMPOSITE as required by supplied video output
in the OTHER FUNCTIONS screen and the menu
option TC OUT to TCG/TCR in the OUTPUT SEL
screen.
AG-HPX250P/EN
SDI OUT or VIDEO OUT
VIDEO IN
SDI IN
HD SDI IN
When the setting menu TC VIDEO SYNC is
set to VIDEO OUT, the time code is output via
TC IN/OUT in tune with VIDEO OUT delay.
70
TC OUT
TC IN
VTR, etc.