Panasonic AG-HPX250 Operating Instructions Manual page 134

Setup menu list (continued)
SCENE FILE screen (continued)
Item
KNEE
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
*1: The factory default when the SCENE FILE dial is set to F1.
___indicates the factory setting.
134
Sets the compression level (knee point) of the high
brightness video signals received through the MOS sensor
to avoid overexposure.
AUTO:
*1
Sets the level automatically according to the received
signals.
HIGH:
High setting (compression starts at approx. 100 %)
MID:
Medium setting (compression starts at approx. 90 %)
LOW:
Low setting (compression starts at approx. 80 %)
Selects the MATRIX table to reproduce color during
shooting.
NORM 1:
*1
Ensures proper color rendition when shooting out in the
open or under halogen lighting.
NORM:
Produces more vivid colors than NORM1.
FLUO:
Ensures proper color rendition when shooting indoors
under fluorescent lighting.
CINE-LIKE:
Produces a tone similar to movie film.
Turns the skin tone detail on or off.
When on, reduces detail to hide any skin blemishes.
ON , OFF
*1
Sets vertical detail.
THIN:
*1
Produces fine detail.
MID:
Produces less detail and wider edging.
THICK:
Produces even less detail and the widest edging effect.
• Progressive recording made at THIN or MID cause
horizontal lines or oblique lines that are almost horizontal
to flicker when viewed on a normal monitor TV (60i (50i):
Interlace). THIN and MID settings will produce higher
resolution video than THICK when shooting progressive
footage that will later be edited.
Edits the name of scene files selected using the SCENE
FILE dial.
Setting Notes
• A change in settings during
DRS operation will not change
video quality.