Manufacturer's Declaration - Linak DESKLINE DL18 IC User Manual

DL18 IC and DL19 IC | 14

Manufacturer's declaration

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Herewith declares that LINAK DESKLINE products as characterized by the following models and types:
®
Master and follower: DLXXXXXXMXXXXXX and DLXXXXXXSXXXXXX
Desk Panels: DP1C, DP1K, DPT, DPB, DPF, DP1L, DP1V, DPA, DPH, DP1U, WDPL1, DPG
Power supply: SMPS006, SMPS001
Accessory: KNC1a00bbcdddd-eeee, where a can be 0 or 1; bb can be 00 or 01; c can be A, B or C; dddd can be
max 1340; and -eeee can be max 1940 or -eeee not used for fixed version. And
DLFaab11cddd000, where aa can be 06, 11, or 19; b can be 1 or 2; c can be A, B or D; and ddd can be 560 or 710
complies with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and safety
requirements relating to the design and construction of machinery:
1.1.2 a) Special use*
1.1.2 b) Selection of the most appropriate methods*
1.1.2 c) Foreseeable misuse*
1.1.2 d) Operator constrains due to the use of personal protective equipment*
1.1.3 Materials and products*
1.2.1 Safety and reliability of control systems
1.2.2 Control devices. Shape, readability, overview*
1.2.3 Starting*
1.2.4 Stopping*
1.5.1 Electricity supply
1.5.10 Radiation. EMC. Emission of electromagnetic radiation, X-rays, -rays*
1.5.11 External radiation*
*need to be further evaluated in the end product
We confirm that prior to market introduction the relevant technical documentation is compiled in accordance
with part B of Annex VII and the assembly instruction pursuant to Annex VI.
This documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
The products mentioned in this document are to be combined for use in height adjustable furniture.
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC
where appropriate.
Nordborg, 2020-12-14