Lenord+Bauer MiniCODER Operating Instructions Manual page 91

Lenord+Bauer
7 Disassembly
Magnetic field!
WARNING
● Ensure that there is at least 30 cm spacing from the product.
Magnetic field!
CAUTION
● Exercise caution when approaching the product to metallic objects.
● Hold the product in such a way as to avoid crushing of fingers or
skin.
NOTICE
Applications of force!
● Do not hit or step on the product.
● Avoid hard knocks.
● Do not bend any connector contacts.
● Do not drop the product.
NOTICE
Penetration of foreign bodies or liquids!
● Ensure that the connectors are protected against penetration of foreign
bodies or liquids!
NOTICE
Incorrect handling of connection components!
● Observe minimum bending radiuses.
NOTICE Incorrect handling of measuring surface!
● Avoid sudden contact between the measuring surface and other ob-
jects.
● Do not destroy or remove the protective layer on the measuring sur-
face.
7.1 Preparations
 Shut down the machine/system and secure it against being restarted.
 Reset the MiniCODER to the factory settings with the mobile service unit.
7.2 Tools and consumables
● Screwdriver (depending on the screw used)
● Distance gauge supplied
GEL 2449M
Preparations 7 Disassembly
91