Lenord+Bauer MiniCODER Operating Instructions Manual page 57

Lenord+Bauer
Structure of the warnings is described in the chapter Safety
1)
Designates the type and source of the hazard!
Describes the hazard and indicates the consequences of non-compliance.
● Describes how to avoid the hazard.
1)
One signal word panel for each hazard level
Structure of preceding and the integrated warnings and general structure of
warnings in the product information
Designates the source of the hazard!
● Describes how to avoid the hazard.
1.5.2 Dimensions, thread sizes and units
The product is based on the metric system. All units are stated in SI units or derived
SI units.
Alternative units are indicated in square brackets [ ].
1.5.3 Notation of numbers in dimensional drawings
The decimal separator is designated by a dot ".".
1.5.4 Symbols, marks and notes
The following symbols, marks and notes are used in these operating instructions or
on the original packaging:
Information for understanding or optimizing work processes
Safety note
Safety measures for persons with implants and pregnant persons.
Magnetic field warning.
Reference to components at risk of ESD
ESD wrist strap
CE marking
Perform straight movement in the direction of the arrow.
GEL 2449M
Conventions 1 About these operating instructions
57